Introduction
GS-MI/T Medium-intensity Double Aviation Obstruction Light is used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers (Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions between 45m and 105m to air traffic with a flashing red safety light.
Specification
|
Name
|
Parameter
|
|
FAA Classify
|
L-864/865/866
|
|
Type
|
GS-MI/T
|
|
Power Supply
|
AC220V
|
|
Power Supply Frequency
|
50HZ～60HZ
|
|
Average Power Consumption
|
≤20W
|
|
Quantity of LED
|
40
|
|
Working Mode
|
Flashing White 40times/min,Red 20times/min
|
|
Light Duration
|
150ms
|
|
Light Intensity
|
Red2000cd（±25%）、White20000cd（±25%）
|
|
Horizontal Out-put
|
360°
|
|
Vertical Divergence
|
3°
|
|
Service Life of the Light Source
|
≥20 years
|
|
Emitting Color
|
Red (Night) White( Daytime)
|
|
Overall Size
|
Φ245 mm×258mm
|
|
Installation Size
|
Φ180×M10
|
|
IP Protection
|
IP65
|
|
Optically Controlled Ambient Brightness
|
50/500Lux
|
|
Ambient Temperature
|
-40℃～70℃
|
|
Weight
|
10kg
|
|
Anti-Wind Ability
|
80m/s
|
Function&Features
- SUS304 stainless steel materials cover.
- With light body, corrosion resistance, extremely reliable and cost saving.
- Built-in efficient reflex attachment co-operates with external full toughened
transparent glass.
- Long life imported xenon tube Light source which provides high brightness, lower
power consumption and more than 10 years long life.
- Strong impact resistance, with control circuit surge prevention device, it can apply to
poor working environment.
- Photocell can switch ON/OFF the light between day and night intensities.
Usage notice
- Please do not install the device in a place where there are no GPS signals.
- It can not put any metal materials at the top of the device, lest the GPS signal
attenuation can't implement synchronization function.
- Check whether the supply voltage does comply with the rated voltage of device.
- Do not open it if the device is out of operation, in order not to be hurt by the internal
high pressure.
- After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
- Non-professional workers can not do the device maintenance, in order not to
expand the error and be hurt.
Application
- Block
- Airport
- High Mast lamp
- Chimney
- Telecom towers
- Bridge
- High-rise Buildings
